Описание

Технические данные — электрические параметры
Preset 1 preset
Preset setting Press reset button and hold. Enter desired value in any order. Release reset button.
Trigger / end contact At 0000: As momentary contact: Contact duration dependent on speed e.g. 100 ms, at 10000 rpm and 50 revolutions = 1 digit At 9999: As permanent contact, contact remains until reset. If no reset takes place, the contact switches back at 8999.
Trigger / precontact Preset number as momentary contact. End contact as permanent contact
Output contact Change-over contact
Switching voltage 230 VAC / VDC
Switching current 2 A
Switching capacity 100 VA / 30 W
Spark extinguisher Recommended for inductive load
Технические данные — механические параметры
Function Revolution counter with preset
Display White numbers on black
Number of digits 4-digits
Digit height 5.5 mm
Count mode Subtracting in a rotational direction to be indicated, adding in reverse direction
Drive shaft Both sides, 4 mm
Reset Manual by button to preset
Operating speed 10000 rpm
Operating torque 0.8 Nm (with 1 rev. = 1 count) 0.4 Nm (with 50 rev. = 1 count)
Measuring range See part number
Ambient temperature 0…+60 °C
Housing type Surface mount housing
Housing colour Grey
Dimensions W x H x L 60 x 62 x 68.5 mm
Dimensions mounting plate 60 x 62 mm
Mounting Surface mount housing
Weight approx. 350 g
Material Housing: Hostaform POM, grey
Connection Cable 0.3 m, 3-pin
''